For friends who use Epson dot matrix printers, you must have unclear print results even though the printer ribbon is new. Now if you solve this problem, don't be complicated and confused because you need to make settings on the DPI side.
The Epson LX-310 Dot Matrix Printer is available for purchase documents. Because of the way this printer works, it uses needles to make writing so that it can be a sustainable type of paper while this paper has a special ink copy, without the need for additional ink.
The printouts are clear and independent of two settings, namely the computer and the printer itself. For those of you who don't understand the setting method, you can follow the tutorial on how to print the Epson Lx 310 Printer Unclear below, which can be done easily. Check out the full review:
Why is Epson LX310 printer not printing clear prints?
 |
| Epson Lx 310 Printer Print Results Are Not Clear |
If your prints are blurry or unclear, then try the following tips:
- Make sure your paper is not curled and that it is loaded correctly in the printer.
- Use paper to ensure proper saturation and absorption of genuine Epson ink.
- Make sure the paper type setting in your product software matches the paper type you are loading.
- Remove each sheet from the output bin when printing.
- Avoid handling prints on glossy paper right after printing to allow the ink to set.
- Turn off the high speed setting in the product software that you are using.
- If you print on both sides of a sheet of paper, smudges may appear on the reverse side of the thick paper, the image is saturated or dark. If one side of the sheet will contain a lighter image or text, print that side first. Make sure the ink has dried before reloading the paper to print on the other side.
- Run a nozzle check to see if the print head nozzles are clogged. Then clean the print head, if necessary.
If the method above has not worked, then my friend can try the Epson Lx 310 Printer Print Result which is not clear below:
First Setting:
- Next to the paper there is a small lever that is used to finish the paper to be printed.
- Please select or download printed paper, download clearly printed paper to multiple presets.
Second setting:
How to set up an Epson Dot Matrix LX 310 printer on Windows 10
- Click Start > Settings > Select Printer & Scanner and select the Epson LX 310 printer.
- Click Manage and a new window will appear Select Print Preferences.
- Set up the Epson LX 310 Printer and click Next
- In the Advanced Options Window select Graphics > Print Quality.
- In the printer settings menu there is an option, namely 120 x 72 dots per inch, click and select 120 x 144 dots per inch print will be thicker than before.
- Click OK to save the settings and the test to print.
How to set up the Epson Dot Matrix LX310 printer in Windows 7
To set up a dot matrix printer on Windows 7 is basically the same as Windows 10:
- Enter Start > Select Device and Printer
- Select the Epson LX 310 printer.
- Right click and select Print Preferences
- Then the image will continue and then proceed with the instructions like setup steps in Windows 10.
Conclusion
That's the information about the Unclear Epson Lx 310 Printer Printout tutorial for adjusting the thickness of the letters on the Epson LX 310 printer on Windows 10 and on Windows 7. Good luck, good luck!!