How to Fix a Totally Dead Canon MP237 Printer. If you have a Canon MP237 series printer that is experiencing blackout problems, don't rush to buy a new printer.
 |
| How to Fix a Canon MP237 Printer Totally Dead |
Because this printer can still be repaired, man. Are you sure you want to know how to do it? Well, follow the steps that I will teach below.
How to Fix a Totally Dead Canon MP237 Printer starting from the easiest and sequential level to the most difficult, as follows:
- For the Mp237 printer to die completely, the first step you need to pay attention to is to check the PLN power source, make sure the power supply is there or not. You can check with a tip screwdriver or you can also use a multimeter/avmeter.
- After you have done the first step above and the power source is there and the printer is not working, the next step is to check the printer power cable with a multi tester with Omh or you can also use another cable / backup which is still fine.
- Then after doing the second step and the power cable is in normal condition but the printer still won't turn on, the next step is to check the adapter/power supply under the printer.
- That is, we take it with a Min (-) screwdriver and replace it with a new or good adapter.
- The next step when the above method fails, our next search is to check the printer on/off button. Check the printer switch with a multi tester, if it turns out to be damaged replace it with a new or good one.
- If the four steps that we have followed above still don't work, then we can be sure that our mp237 printer motherboard is cut or damaged.
- Fixing it requires special skills and thoroughness as well as a lot of patience.
That's what my friend wrote during the day about How to Fix a Totally Dead Canon MP237 Printer. Hopefully what I write can bring benefits to visitors and become a practice for writers.