Printers are one of the most important devices in the world of printing. This printer is a device that can buy images or text using paper or other media. Printers are divided into several types of Ink Jet printers, Laserjet printers, and also Dot Matrix printers.
As a printer user, you already know how to charge your printer. Be aware that incorrect charging may cause damage to this device. Therefore filling the printer must also learn to use this device can be done properly.
More accuracy must be applied when compiling and refilling printer ink using refill ink on the market. Especially if you have never launched a printer cartridge. So, you have to be extra careful if you don't want damage to your device.
 |
| Tutorial How to Fill Printer Ink Correctly |
To prevent damage, you also need to buy a printer that meets the requirements for satisfactory print results and the printing machine is not a problem in the long run. To be right on target, know the following Tutorial How to Fill Printer Ink Correctly.
Tutorial How to Fill Printer Ink Correctly
Equipment that must be provided
- Ink refill to be inserted
- Needle for punching printer cartridges
- Tissue or cloth for cleaning pre-filled cartridges
How to fill printer ink correctly
- Turn on the printer then wait until the light indicator is not turned on.
- Open the case cover and then remove the printer cartridge by releasing it all the way down slowly.
- Paper label affixed to the top of the cartridge, retaining the insertion point 3 for color 1 for black.
- Use the needle that has been prepared to punch a hole in the cartridge, use it not to spill because the hole is too big, you need to use a needle that fits.
- Inject the ink slowly, and make sure you are not in a hurry because the ink could spill over and cause damage to the cartridge. In this case, my friend does not need to inject the ink until it runs out to get just enough.
- After filling is complete, close the injection point that has changed by using insulation or duct tape.
- Reinsert the cartridge into the printer by gently moving it up.
- Close the printer case and wait for the newly finished cartridge to start running and carry out the process as usual.
In the detection process, the printer will usually imagine if the cartridge is empty. If this happens, let it sit for about 5 minutes. Do a reset If you want, the printer can return to normal. So, this is a normal problem and not a problem with your printer. To keep asking for the stability of the printer's function, you are asked to keep paying attention to the amount of ink in the printer, filling it at the right time.
Do not let this ink is allowed to dry so as to make the printer damaged. To avoid this, use your printer machine every day. The goal is to keep the cartridges moving so they don't get jammed unless there is a problem with the machine.
To get prints that satisfy readers related to interprinter.com, use quality printer ink. Because the quality of this printer ink will determine the printout. After use do not forget to turn off the printer.
Keep in mind that the printer will last longer when you just turn off the power button without unplugging the socket. So, just turn on the on/off button just leave it off.
However, the operation must be reactivated not the operating system. That's the information about the Tutorial How to Fill Printer Ink Correctly, hopefully it can be helpful and useful...