As you know, electronic devices such as printers will not always be in good and optimal condition. Because with continuous use from time to time, the use of printers will certainly continue to increase in quality both in printers, machines, ink, cartridges and in other parts. As happened to one of the printers made by Canon, the Canon MG2570. You need to know that there are several error codes that this printer has.
In addition, there are several other Canon MG2570 printer error codes which usually point to the number of blinks on the condition of the ink, hardware damage, memory, layout and many other problems.
Therefore, this time Erzedka.com will provide information about the error code on this printer as well as solutions on how to Solve the Canon Pixma MG2570 Printer Error.
 |
| Error Canon Pixma MG2570 |
The following is information on the blink error code that usually occurs on the Canon Pixma MG2570, see more information below:
- 16 times blink:
Out of ink supplies so you have to refill the ink cartridges.
- 14 or 15 blinks:
Cartridge is not recognized, maybe the cartridge is damaged or not installed properly. The fix is that you have to replace the cartridge with a new one.
- 13 blinks:
The ink level in the cartridge cannot be changed. The fix is that you can fill in the ink in the cartridge then press the stop or reset button for 5 seconds.
- 8 times blink:
Indicates that the condition of the ink absorber is almost full.
- 7 blinks:
The cartridge is not read, but the EEPROM printer can also print completely. This is common for printers that have reached the specified capability limit for a certain period. This error usually appears with error code 5B00 on the device screen. To fix this, my friend can replace the IC on the printer device. This happens because this IC cannot be reset using software.
- 5 blinks:
Remove the cartridge again and then adjust the cartridge to the correct installation position.
- 3 times blink:
There is jammed paper or other media in the paper feed tray so you can check manually first.
- 2 times blink:
There is no paper media to use for printing documents.
The error code on the Canon Pixma MG2570 Printer indicator light above which indicates that the printer is experiencing problems which can still be fixed by looking at the signal clues through the number of flashing lights reviewed in the table or, it is important to support and my friend needs to repair the printer.
 |
| Canon Pixma MG2570 Printer indicator |
So much information about error codes and tips on how to solve the Canon Pixma MG2570 Printer Error that you can follow and do easily and quickly. Hopefully our article about printers this time can be useful and help solve your problems that occur on the Canon Pixma MG250 printer.
If you have any suggestions or input regarding this problem, you can write them in the column below. Look forward to our next interesting article, thank you. Dont forget to comment below..!!