All electronic devices supported by the printer will certainly not continue to be in perfect and optimal condition, with continuous use from time to time the use of the printer will continue to increase in good quality in the printer, cartridge, ink, or other parts.
As happened to the Canon MG2570 flashing yellow light and power printer error received by the admin, this price canon multifunction printer previously ran suddenly, suddenly unable to print and flashing when the 3x light appeared.
 |
| How to Repair a Canon MG2570 Printer with Flashing Lights |
Here Erzedka.com summarizes How to Repair a Canon MG2570 Printer with Flickering Lights that you can easily follow:
How to Repair a Canon MG2570 Printer with Flashing Lights
Earlier on the previous day the canon MG2570 printer was fine, We remembered on some list of canon MG2570 printer error codes obtained from a friend's post on social media, after re-checking the 3x light blink error MG2570 which was indicated as the paper sought by the paper / media in paper sensor) even though before there was no error/jamming score compilation, check the cartridge housing it turns out to have no paper or anything?
Investigations have been carried out various checks and found the following error results related to the material fed into the paper, thus the printer paper sensor is connected (media jam).
Apart from that, there are still some other error codes for the Canon MG2570 printer which are usually associated with the number of flashes on the memory and the power light, let's also accept all these printer errors;
- 2x blink orange. Print without media
- 3x blink orange Printer approves paper jam/other media requested in paper feed tray (feed tray)
- 4x blink orange. The cartridge cannot be read. The method for fixing the cartridge is removing the cartridge and then reinserting the cartridge in the correct installation position.
- 5x blink orange cartridge cannot be read. The method for fixing the cartridge is removing the cartridge and then reinserting the cartridge in the correct installation position.
- 7x blink orange There are several variations of the problem here:
- Cartridges cannot be read, but EEPROM printers can also print completely. This is common for printers that have reached the specified capability limit for a certain period. This error usually appears with error code 5B00 on the device screen.
- To fix this, my friend can replace the IC508 on the printer device (for those who are experienced), for those who have not been able to use the nearest printer service, this happens because this IC cannot be reset using software.
- 8x Blink Orange Ink Absorber almost full
- 13x blinking The ink level in the cartridge cannot be displayed. The fix is that you can refill the ink in the cartridge then press the stop or reset button for 5 seconds.
- 14x / 15x blink orange cartridge is not known, maybe the cartridge may be damaged or not installed properly. The solution is to replace the cartridge with a new one.
- Blinking 16x orange The ink supply has run out. you have to refill the ink cartridges
Now the error code on the canon MG2570 printer indicator light above indicates that the printer has a problem and shows a signal through the number of blinking lights reviewed in the table or, it is important to support and my friend needs to make repairs to the printer unit.
Hopefully the article How to Repair a Canon Printer MG2570 Flashing Light this time can help and become information in repairing printer damage so that it can return to normal again, thank you, my friend, for visiting the Erzedka.com website this time.