Using an infusion printer does have advantages when filling ink, namely you no longer need to bother removing the cartridge, you just need to open the infusion tube and then inject the ink. However, even though it seems easy, it turns out that there are some things that you must understand. Here's a tutorial on How to Fill Canon iP2770 Printer Ink Infuse.
 |
| How to Fill Canon iP2770 Printer Ink Infuse |
How to Fill Canon iP2770 Printer Ink Infuse
Before filling the ink, it is necessary to do the following steps:
- Prepare refill ink that will be used to fill (can be purchased as a package at the printer / computer accessories store)
- Prepare dry wipes for cleaning cartridges
- Prepare the cutter knife to remove the label sticker on the cartridge
Before receiving ink on the Canon iP2770 printer, my friend prepares the tools in advance such as paper clips, syringes and refill ink according to what you use on Canon printers. Next, follow the steps below.
- Clamp the infusion tube using a paperclip.
- Then open the lid of the infusion tube that you want to fill ink with.
- Then fill the infusion tube with refilled ink using a syringe.
- Next, do the head cleaning and then when the middle of the head cleaning process opens the clamp fully.
- Finally, do a print test on your PC / laptop and wait for the print process to finish.
Clamping the hose with a paperclip before filling the ink, works to cut off the flow of ink into the cartridge, allowing the ink to flow freely into the cartridge which often causes ink flooding or excess ink (Over Ink).
 |
| Canon iP2770 Printer Ink Infuse |
When filling the ink on the infusion printer, first, open the lid of the tube, also finish the printing process. However, select the tube cap when the printer is not in use and you can open the tube cap when the printer is going to be used for printing.
Doing head cleaning can make prints better. However, don't do it too often, because it can make the cartridge easily damaged. Just once when finished filling ink refills.
How to Fill Canon iP2770 Ink that has not been Infused
Plug the printer into the power cable and the USB cable on the computer / laptop. Turn on the printer, wait until the indicator light does not light up. Open the printer cover / canon iP2770 printer cover by lifting the cover case. Then the cartridge container will be centered.
Open the cover where the cartridge is placed by removing it by looking at the arrow on the cover. Remove all cartridges from the printer. Remove the cartridge label sticker using a cutter.
The color code for the cartridge is CL811 and the cartridge code for Black is PG810. Don't get it wrong. When holding the cartridge, do not touch the gold dot or keep the ink dirty. This can cause the cartridge to be illegible or dead.
Use the needle provided in 1 refill ink package that has been purchased to punch holes / fill holes in the cartridges. Punch a hole in all cartridges with the Needle until it is about enough to fit a refilled syringe.
For Color (compile) do not get the wrong color. Here's a guide to the contents of the color cartridge:
- Upper Hole: Color Red (Magenta) M
- Right Hole: Color Yellow (Yellow) Y
- Left Hole: Color Blue (Cyan) C
Fill in all the color holes according to the color guide above. Fill carefully with a syringe filled with ink. Don't change the color. For Black (black) there is only 1 hole that needs to be filled. So fill it carefully until it is full.
When finished filling all the cartridges cover the cartridge with the sticker label earlier. Or you can also use insulation. Install the cartridge in its place in the printer and close the cartridge cover by lifting the cover.
Close the printer case and wait a while until the printer status is ready / the quiet power light does not go up. Please test the printer by printing a document.
Especially after filling out the printer, the compilation will collect documents that will come out of the printer asking for a resume. Then press and hold the resume button (below the power button) for about 5-10 seconds then release.
The problem that occurs at this time is that incompatible printers will continue to use cartridges. This is not a serious problem, all it does is remove the cartridge then wipe the gold layer off with a dry tissue and reinstall it. Done
That's the tutorial on How to Fill Canon iP2770 Printer Ink Infuse that Erzedka.com can convey. Hopefully this information can be useful, good luck!