How to clean canon printer cartridges that cause ink to not come out or printouts to become blurry, you can do it yourself. An important part of the printer that determines the source of the problem in the Cartridge which is where the ink is stored, if this part is the problem it will automatically affect the printout.
A printer that is new, maybe while the printing process is still running, but when the printer is on the machine will definitely fix the problem. If what you experience is a print that is not ordinary or good as usual, then you can do the following ways to handle it. This time around Printers will provide information on tips on how to Clean Canon Cartridges. Check out more information below:
 |
| How to Clean Canon Cartridges |
How to Clean Canon Cartridges
Often we do not understand the cause of the blockage or jam in the cartridge. This is a challenge that often occurs. It is hoped that by knowing what things can be rejected, this can be avoided. Here are some of the causes:
- The printer head temperature is too hot, too many prints in one process. It's best to pause when you have a lot to open, rest and then continue to keep your head normal.
- The printer is often not used.
- Rarely do head cleaning.
How to Solve the Problem:
Before disassembling the cartridge, it's a good idea to remove the cleaning process first to ensure it is removed, remove it to deal with blurry printouts, only need to clean the head on the software to normalize it again, if it still doesn't want to proceed with deep cleaning. This is a way that can be done in overcoming minor blockages.
- How to clean printer cartridges with moderate blockages, in contrast to mild blockages, cannot be done through software but manually, by using an injection and a suction toolkit installed on the cartridge to perform suction.
- In handling heavy blockages, longer work steps are needed, first prepare warm water or head cleaner liquid in the container, soak the head in the cartridge. Remember! Only the head is soaked and it should not be about the chip.
- Leave it for a few minutes or jam, the length of time for soaking really depends on the level of blockage that occurs in the head, if it's not too severe then it only takes a few minutes but if it's severe it can take a day.
- If it has passed the immersion, do suction to make sure and do the remaining expenditure, if it feels clean, refill (refill).
- If there is a splash of ink on the cartridge, then clean it with a tissue, but be careful not to talk about it with your head because it can cause damage. If so, plug it back into the printer to do a test print. Until this step, how to clean the printer cartridge is complete.
 |
Cleaning Canon Cartridges |
The Essence Of The Problem
Ink clogs that cause print results to be not good because there is ink that dries up so that it clogs the head. In addition, dirt such as dust mixed with the ink can also clog the head, allowing the use of the highest quality ink to prevent damage or blockage to the printer head.
Those are the tips on how to clean Canon cartridges that Erzedka.com has summarized. Hopefully this information can be used as a reference if you want to Clean Canon Cartridges. Dont forget to comment below about this article..!!